* A speed square 美女球员入日本籍 海归硕士砸足疗店

Home-and-Family Many years ago I found my love for DIY woodworking plans. My dad helped me complete my first 4-H woodworking project. We built a kitchen towel rack. I received an award, and my dad hung it in my mother’s kitchen. My dad was well equipped for DIY woodworking plans; he had all the tools. Even after a few years, I am still finding tools for my workshop. To get started with woodworking, you will need a few basic tools, a woodworking space, along with a few general safety rules. If you are like me when I began, you don’t have a lot of big tools at your access for DIY woodworking plans. That’s ok. You don’t have to have all of the big stationary tools to begin with DIY woodworking plans. My suggestion is to wait until you find that woodworking is right for you before making major purchases. Beginning tools that I recommend are: * A speed square, tape, and pencil for marking. * Straight cuts can be made using a circular saw. To ensure straight cutting, build a guide jig. * You can cut curves with a jigsaw. * Use a block plane for shaping of the wood. A router is also good for shaping wood, along with tongue and groove. * A cordless drill is great for drilling holes. * For smoothing, you can use a block sander or a small hand sander. You can find a reasonably priced hand sander at your local hardware store. * For DIY woodworking plans, buy a good clamp set. Make sure there are many sizes. After gluing your wood, clamps will hold the wood secure. Along with the tools for DIY woodworking plans, you are going to need a space. This does not have to be the biggest space, but I do recommend an area that is mostly undisturbed, perhaps in the garage or basement. Section off an area of the wall to hang your tools. You will also need a sturdy workbench, equipped with a vice for holding things in place. When purchasing a vice, be sure that it is specifically for woodworking, so not to mark or dent the wood. Always practice safety when woodworking. Unfortunately, I’ve not always practiced safety. However, I’ve learned better after a few minor scrapes. Basic safety tips for DIY woodworking plans are: * Safety goggles will protect your eyes from things like sawdust. * Protect your ears when using tools for long periods. * Use a face mask when you are sanding, as there will be many fine particles in the air. * If you have children, make sure you unplug the tools and store them properly. Most larger machines have safety switches. Get in the habit early of doing these things so no one else gets hurt! * Make sure blades and bits are sharp. For instance, a dull blade in a circular saw can cause it to kick back. * Never alter safety devices on tools! Do not tie off the guard on your circular saw; hold the guard as you cut. If you tie the guard and set the saw down, it could run off; potentially cutting someone. DIY woodworking plans are not complex, as you now see. With some imagination, some space and a few basic tools you can begin woodworking and create pieces to be proud of for many years. About the Author: 相关的主题文章: